Set Up Dolby Atmos and Audio Passthrough in Plex
Audio passthrough sends the original, untouched audio track from your media file directly to your AV receiver or soundbar for decoding. Without passthrough, Plex transcodes the audio to a simpler format — converting lossless Dolby TrueHD Atmos to lossy stereo AAC, losing the spatial height channels, dynamic range, and lossless quality. Getting passthrough right means hearing your media exactly as it was mastered. This guide covers the complete audio chain from file to speaker.
Audio Formats and What They Need
| Format | Channels | Quality | Passthrough Requirement |
| AAC Stereo | 2.0 | Lossy | None — every device decodes natively |
| AC3 (Dolby Digital) | 5.1 | Lossy, 640 kbps max | Basic — optical/HDMI, nearly universal |
| EAC3 (Dolby Digital Plus) | 7.1 + Atmos metadata | Lossy, up to 6 Mbps | HDMI — optical cannot carry it |
| DTS | 5.1 | Lossy, 1.5 Mbps | Basic — optical/HDMI |
| DTS-HD MA | 7.1 | Lossless | HDMI only — high bandwidth |
| DTS:X | 7.1 + height | Lossless + object-based | HDMI only — receiver must support DTS:X |
| Dolby TrueHD | 7.1 | Lossless | HDMI only — high bandwidth |
| Dolby TrueHD + Atmos | 7.1.4+ objects | Lossless + object-based | HDMI eARC or direct HDMI — receiver must support Atmos |
The key distinction: optical (TOSLINK/S/PDIF) carries only basic lossy formats (AC3, DTS core). HDMI carries everything. For Atmos and lossless audio, HDMI is mandatory.
The Audio Chain
Audio passthrough requires every link in the chain to support the format:
Media file → Plex server → Network → Plex client → HDMI cable → AV receiver → Speakers
If any single component cannot handle the format, Plex falls back to transcoding. The most common failure points:
- The Plex client does not support the format (check client capabilities).
- The HDMI connection does not support the bandwidth (eARC required for TrueHD Atmos from TV apps).
- The client's Plex app settings have passthrough disabled.
- The AV receiver does not decode the format (older receivers may lack Atmos/DTS:X support).
Client Configuration
Apple TV 4K
The Apple TV 4K supports EAC3 Atmos passthrough natively. For TrueHD Atmos, it transcodes the spatial metadata into EAC3 Atmos — this is a lossy conversion but preserves the Atmos height channels.
- Apple TV Settings > Video and Audio > Audio Format: select Change Format.
- Set to Dolby Atmos.
- In the Plex app: Settings > Audio > Allow Direct Play: On.
NVIDIA Shield TV
The Shield supports full bitstream passthrough for every format including TrueHD Atmos and DTS:X — the only consumer streaming device that does this reliably.
- Shield Settings > Device Preferences > Display and Sound > Advanced sound settings.
- Set Available formats to Auto or manually enable each format your receiver supports.
- In the Plex app: Settings > Advanced > Audio > Allow Passthrough: On.
Amazon Fire TV
Fire TV supports EAC3 Atmos. TrueHD passthrough is not supported — Plex transcodes TrueHD to EAC3 or AC3.
- In the Plex app: Settings > Advanced > Audio.
- Allow Direct Play: On.
- Allow Direct Stream: On.
Smart TV Apps
Built-in Plex apps on LG, Samsung, and Sony TVs generally support EAC3 Atmos. TrueHD Atmos passthrough depends on the TV model and whether it supports eARC (Enhanced Audio Return Channel) to send lossless audio back to a receiver.
HDMI and eARC
Standard HDMI ARC (Audio Return Channel) carries only compressed audio — AC3 and EAC3. It cannot carry lossless TrueHD or DTS-HD MA.
HDMI eARC (Enhanced Audio Return Channel) carries uncompressed and lossless audio including TrueHD Atmos and DTS:X. eARC requires:
- HDMI 2.1 port on both the TV and receiver (labeled "eARC").
- An Ultra High Speed HDMI cable (48 Gbps rated).
- eARC enabled in both the TV and receiver settings.
If you connect your streaming device directly to the AV receiver (instead of through the TV), eARC is not needed — the full audio bitstream goes directly from the device to the receiver via HDMI.
Direct Connection vs Through TV
Two wiring options for surround sound:
Device → Receiver → TV (Recommended)
Connect your streaming device (Shield, Apple TV) directly to an HDMI input on your AV receiver. The receiver passes video through to the TV. All audio formats work because the full bitstream goes directly to the receiver without any TV processing in the path.
Device → TV → Receiver (via ARC/eARC)
Connect the streaming device to the TV, then route audio from the TV to the receiver via ARC/eARC. Simpler cabling but limited by ARC bandwidth unless eARC is available. This path adds potential compatibility issues.
Plex Server Settings
Server-side settings that affect audio passthrough:
- Settings > Transcoder > Allow Direct Play: Must be enabled. If disabled, Plex transcodes everything regardless of client capability.
- Settings > Transcoder > Allow Direct Stream: Should be enabled. Direct stream remuxes (changes container without re-encoding) when needed, which preserves audio quality.
- Remote streaming quality limits: Per-user or global quality caps can force audio transcoding for remote users. Set remote quality to Original/Maximum for users who have capable home theater systems.
Troubleshooting
Getting Stereo Instead of Surround
- Check the Plex Dashboard during playback. If it shows "Transcode (Audio)" the client requested a format change. Look at the reason — usually the client reported it cannot decode the format.
- Verify the client's audio settings allow passthrough/direct play.
- Check the receiver's input signal display. It should show the incoming format (Dolby TrueHD, DTS-HD MA, etc.). If it shows PCM Stereo, the client decoded and downmixed before sending.
Atmos Not Engaging on Receiver
- Verify the source file actually contains Atmos metadata. Not all Dolby TrueHD tracks have Atmos — Atmos is an extension on top of TrueHD. Use MediaInfo to check: look for "Dolby Atmos" in the audio track details.
- Ensure the receiver has Atmos processing enabled for the input channel.
- Check HDMI connection: Atmos requires direct HDMI or eARC — optical cannot carry it.
Audio Sync Drift With Passthrough
Some client/receiver combinations introduce a slight audio delay during passthrough. If audio leads or lags video by 50-200ms:
- Check the receiver's lip-sync/audio delay setting and adjust.
- Some clients have an audio delay offset in their Plex settings.
- Try switching between passthrough and device-decoded (the client decodes to PCM and sends uncompressed audio) to see if the drift persists.