Get Dolby Atmos and DTS:X Working in Plex
Published 2026-10-16 · PlexBeam
Dolby Atmos and DTS:X add height and object-based positioning to surround sound — sounds move through three-dimensional space rather than being locked to fixed channel positions. Getting these formats to work in Plex requires the right file, the right client device, the right HDMI chain, and the right Plex settings. Any weak link in the chain and Plex falls back to standard 5.1 or stereo. This guide covers every component.
How Object-Based Audio Differs
Traditional surround sound (5.1, 7.1) assigns audio to fixed speaker positions: front left, center, right, surrounds, subwoofer. Object-based audio like Atmos and DTS:X describes where sounds exist in a 3D space. The AV receiver or soundbar maps these sound objects to whatever speakers are physically present — from a 5.1.2 setup (5 channels, 1 sub, 2 height speakers) to a full 7.1.4 Atmos layout or even a soundbar with upfiring drivers.
The benefit: content mixed in Atmos sounds better on any supported system because the renderer adapts to your specific speaker configuration rather than downmixing from a fixed channel count.
File Requirements
Dolby Atmos
Atmos audio in media files comes in two forms:
- TrueHD Atmos: Lossless. The Atmos spatial metadata is embedded inside a Dolby TrueHD audio track. The TrueHD track also contains a 7.1 channel bed as a fallback for devices that do not support Atmos. This is the highest quality option, found in 4K Blu-ray remuxes and high-quality encodes. Requires HDMI for passthrough.
- EAC3-JOC (Dolby Digital Plus with Joint Object Coding): Lossy. The Atmos metadata is embedded in a Dolby Digital Plus track. This is the streaming standard — Netflix, Disney+, and other services use this format. Smaller file size than TrueHD but lower audio quality. Can pass through eARC.
DTS:X
DTS:X spatial audio is embedded in a DTS-HD Master Audio track. Like TrueHD Atmos, it is lossless and requires HDMI for passthrough. The DTS-HD MA track contains a 7.1 channel fallback. DTS:X is less common than Atmos in streaming and encode releases but appears in many 4K Blu-ray remuxes.
Container Format
Both TrueHD Atmos and DTS:X audio are typically found in MKV containers. MP4 containers do not support TrueHD or DTS-HD MA tracks. If your Atmos file is in an MKV container, verify your Plex client can direct play MKV — most modern clients handle this without issues.
Client Device Support
| Device | TrueHD Atmos | EAC3 Atmos | DTS:X | Notes |
| NVIDIA Shield Pro | Yes | Yes | Yes | Full support, best Plex audio client |
| Apple TV 4K | No | Yes | No | No DTS passthrough of any kind |
| Fire TV Stick 4K Max | No | Yes | Yes (DTS decode) | No TrueHD passthrough |
| Fire TV Cube (3rd gen) | No | Yes | Yes | No TrueHD passthrough |
| Chromecast Google TV 4K | No | Yes | No | DTS decode to PCM only |
| Roku Ultra (2022+) | No | Yes | No | DTS to PCM, no TrueHD |
| Xbox Series X | Yes | Yes | Yes | Full support via Plex app |
| PlayStation 5 | No | No | No | No bitstream passthrough |
| Plex HTPC (Windows) | Yes | Yes | Yes | Full passthrough via HDMI |
The NVIDIA Shield Pro is the only streaming device that handles every audio format without limitation. If lossless Atmos and DTS:X are priorities, the Shield Pro or a Windows HTPC are the only consumer streaming devices that deliver full passthrough.
HDMI Chain
Every component between the Plex client and the speakers must support the audio format being passed through.
Direct to Receiver
The simplest and most reliable setup: connect the Plex client directly to the AV receiver via HDMI, then the receiver to the TV. The receiver decodes the Atmos or DTS:X bitstream and sends audio to the speakers. The TV receives video only.
Through TV (ARC/eARC)
When the client connects to the TV first:
- Standard ARC: Supports only Dolby Digital and DTS. No Atmos of any kind. TrueHD and DTS-HD are stripped to their lossy cores.
- eARC (Enhanced Audio Return Channel): Supports TrueHD Atmos, EAC3 Atmos, and DTS:X. Both the TV and receiver must support eARC, and it must be enabled in both devices' settings.
If your TV does not support eARC, connect the Plex client directly to the receiver. This is the most common fix for Atmos not working.
Soundbars
Soundbars with Atmos support typically connect via HDMI eARC from the TV. Verify the soundbar specifically supports the Atmos format in your files:
- Many soundbars support EAC3 Atmos (lossy) but not TrueHD Atmos (lossless).
- DTS:X support varies — some Atmos soundbars do not decode DTS:X at all.
- Check the soundbar's specifications for supported audio codecs rather than relying on marketing claims.
Plex Configuration
Server Settings
- Ensure the stream is direct playing — any transcoding strips the Atmos/DTS:X metadata. Check Settings, Transcoder and verify hardware transcoding is enabled as a safety net, but the goal is zero transcoding for these streams.
- Do not enable Audio Boost. Any audio processing on the server side breaks the original bitstream.
Client Settings
- Set playback quality to Original or Maximum. Any quality reduction forces transcoding.
- Enable passthrough in the Plex client's audio settings.
- Enable each specific format: Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD (if supported by the device), DTS-HD (if supported).
Subtitle Impact
Image-based subtitles (PGS, VOBSUB) force a video transcode because Plex must burn them into the video stream. When the video transcodes, Plex often also transcodes the audio — destroying the Atmos or DTS:X bitstream. Use SRT (text) subtitles to avoid triggering a transcode.
Verifying Atmos and DTS:X
Receiver Display
The most reliable indicator. When Atmos is active, the receiver's display or on-screen display (OSD) shows Dolby Atmos or Dolby TrueHD + Atmos. For DTS:X, it shows DTS:X or DTS-HD MA + DTS:X. If the receiver shows Dolby Digital, DTS, PCM, or Multichannel PCM, the object-based audio is not being delivered.
Plex Dashboard
Check Now Playing. The audio stream should show Direct Play. If it shows Transcode or Direct Stream for audio, the original bitstream is being modified and Atmos/DTS:X metadata is lost.
Tautulli
Tautulli shows the audio transcode decision for each stream. Look for audio_decision: direct play and confirm the audio codec matches the source file (truehd, eac3, dts).
Dual Audio Tracks
The best practice for compatibility is media files with two audio tracks:
- Primary: TrueHD Atmos or DTS:X (for capable clients with passthrough).
- Secondary: AAC 5.1 or EAC3 5.1 (for clients that cannot decode the lossless track).
When a client cannot passthrough the primary track, Plex automatically falls back to the secondary compatible track without transcoding. This avoids the scenario where an incapable client forces a resource-intensive audio transcode.
Troubleshooting
Receiver Shows 5.1 or 7.1 Instead of Atmos
- The file may contain TrueHD 7.1 without Atmos metadata. Not all TrueHD tracks include Atmos — verify by checking the file's audio track details in Plex or MediaInfo.
- The client may not support TrueHD passthrough. Check the device compatibility table above.
- eARC may not be enabled. Check both TV and receiver settings for eARC toggle.
No Audio at All During Passthrough
- The receiver may not support the specific codec. Temporarily disable passthrough in Plex — if audio plays (as PCM), the issue is in the passthrough chain, not the file.
- Try a different HDMI cable. Damaged cables can pass video but fail on high-bandwidth audio.
- Some receivers require enabling an Enhanced HDMI or 4K Enhanced mode per input to accept lossless audio bitstreams.
Audio Cuts Out Intermittently
- HDMI handshake issues. Try power-cycling the entire chain: TV, receiver, client device — in that order.
- Some Plex clients have known bugs with specific audio formats. Check the Plex forums for device-specific issues and update the app to the latest version.