PlexBeam

Audio Passthrough in Plex: Every Format Explained

Published 2026-10-16 · PlexBeam

Audio passthrough sends the original audio bitstream from a media file directly to your AV receiver or soundbar without any processing by the Plex client or server. The receiver decodes the audio and sends it to your speakers. This preserves the full quality of the original audio track — lossless formats stay lossless, and object-based formats like Dolby Atmos retain their spatial metadata. When passthrough fails, Plex either transcodes the audio (losing quality) or outputs silence. This guide covers every audio format, the requirements for passthrough, and how to configure the full chain.

Audio Formats and Their Requirements

Stereo (AAC, MP3, FLAC)

Basic stereo audio plays on every device without passthrough — the Plex client decodes it locally and outputs PCM to the speakers or headphones. Passthrough is not needed for stereo content. FLAC stereo is decoded to PCM by the client with no quality loss.

Dolby Digital (AC3) 5.1

The most widely supported surround format. Every receiver, soundbar, and TV with optical or HDMI audio input supports Dolby Digital. Passthrough requirements:

Dolby Digital is a lossy codec limited to 640 kbps. It is the universal fallback — when higher-quality formats cannot pass through, Dolby Digital usually works.

DTS 5.1

DTS core is a lossy surround format comparable to Dolby Digital. Most receivers and soundbars support DTS, but some budget soundbars decode only Dolby and not DTS. Passthrough requirements are the same as Dolby Digital: HDMI or optical and the DTS option enabled in Plex client settings.

Notable exception: Apple TV does not support DTS passthrough of any kind. DTS tracks on Apple TV are decoded to multichannel PCM or transcoded by the server.

Dolby Digital Plus (EAC3) 5.1/7.1

An improved version of Dolby Digital with higher bitrates and support for 7.1 channels. Dolby Digital Plus requires HDMI — it cannot pass through optical S/PDIF. Most streaming devices (Fire TV, Chromecast, Apple TV, Roku) support EAC3 passthrough over HDMI.

Dolby Digital Plus is also the carrier for lossy Dolby Atmos (EAC3-JOC). If your device supports EAC3 passthrough, it typically supports EAC3 Atmos as well.

DTS-HD Master Audio 5.1/7.1

Lossless surround sound. DTS-HD MA is bit-for-bit identical to the studio master. It requires HDMI — no optical passthrough. The DTS-HD MA bitstream contains a DTS core as a fallback: if the receiver does not support DTS-HD MA, it falls back to lossy DTS automatically.

Client requirements for passthrough:

Dolby TrueHD 5.1/7.1

Lossless surround sound from Dolby, the counterpart to DTS-HD MA. TrueHD requires HDMI and cannot pass through optical. Like DTS-HD MA, TrueHD streams contain a lossy Dolby Digital fallback core.

TrueHD passthrough is supported on fewer devices than other formats:

TrueHD is also the carrier for lossless Dolby Atmos. A TrueHD Atmos track passes through identically to regular TrueHD — the Atmos metadata rides inside the TrueHD bitstream.

DTS:X

Object-based spatial audio from DTS, embedded in a DTS-HD MA track. DTS:X passthrough requirements are identical to DTS-HD MA. The receiver must specifically support DTS:X decoding to render the object-based audio — otherwise it falls back to the DTS-HD MA channel-based mix.

Dolby Atmos (TrueHD and EAC3)

Atmos exists in two forms with different passthrough requirements:

Connection Types

HDMI

HDMI carries all audio formats. It is the only connection that supports lossless audio (TrueHD, DTS-HD MA) and object-based audio (Atmos, DTS:X). For audio passthrough, the HDMI connection must support the bandwidth required by the format:

Optical (S/PDIF)

Optical supports only Dolby Digital and DTS — the lossy compressed formats. It cannot carry TrueHD, DTS-HD MA, Dolby Digital Plus, Atmos, or DTS:X. If your only audio connection is optical, you are limited to lossy 5.1 surround.

ARC vs eARC

When the Plex client connects to the TV first (not directly to the receiver):

If your TV lacks eARC, connect the Plex client directly to the receiver to access lossless audio formats.

Plex Client Configuration

  1. Open the Plex app on your streaming device.
  2. Go to Settings, then Audio or Advanced.
  3. Enable Audio Passthrough (may be labeled Allow Passthrough).
  4. Enable each specific codec you want to pass through: Dolby Digital (AC3), DTS, Dolby Digital Plus (EAC3), Dolby TrueHD (if available), DTS-HD (if available).
  5. Set playback quality to Original or Maximum to prevent audio transcoding.

Only enable codecs that your receiver actually supports. Enabling a codec the receiver cannot decode results in silence or distorted audio during playback.

Server Configuration

On the Plex server, ensure nothing interferes with the audio bitstream:

Multi-Track Audio Strategy

The most compatible approach is media files with multiple audio tracks:

Plex automatically selects a compatible track. When the primary track cannot pass through, Plex falls back to the secondary track without transcoding. This prevents the server from wasting resources on audio transcoding and avoids quality issues from real-time audio conversion.

Verifying Passthrough

Receiver Display

The most reliable check. During playback, the receiver or soundbar display shows the active audio format: Dolby Digital, DTS, Dolby TrueHD, DTS-HD MA, Dolby Atmos, DTS:X, or PCM. If you expect TrueHD but the receiver shows Dolby Digital, passthrough failed and the bitstream fell back to the lossy core or was transcoded.

Plex Dashboard

Check Now Playing in the Plex Web UI. The audio stream should show Direct Play for both video and audio. If audio shows Transcode, the original audio is being re-encoded — passthrough is not working.

Troubleshooting

No Audio During Passthrough

Audio Drops Out Periodically

Stereo Instead of Surround

← Back to Blog
More from LuxuriousComputers: LuxuriousComputers · Computer Repair · Remote Fix · Phone Repair · HVAC · Plex Support